Temperature Valve Actuator Replacement - Left Side. Chevrolet Impala 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Impala 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Temperature Valve Actuator Replacement - Left Side

Callout	Component Name
Preliminary Procedure Remove the left knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement. Disconnect the left air temperature actuator electrical connector.
1	Temperature Actuator Screw - Left (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 1.5 N·m (13 lb in)
2	Temperature Actuator - Left Tip Refer to Control Module References for programming and setup information.

Callout

Component Name

Remove the left knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement.
Disconnect the left air temperature actuator electrical connector.

Temperature Actuator Screw - Left (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.5 N·m (13 lb in)

Temperature Actuator - Left

Tip
Refer to Control Module References for programming and setup information.