Emergency Vehicle Rear Lamp Replacement Impala RPO 6J6

1. Remove the rear seat back. Refer to Rear Seat Back Replacement.
2. Remove the bolts from the rear window panel lamp bracket(s).



3. Disconnect the electrical connector(s).
4. Remove the rear window panel lamp(s) from the rear window panel.

1. Connect the electrical connector.



2. Position the rear window panel lamp bracket(s) to the rear window panel.

Caution: Refer to Fastener Caution in the Preface section.

3. Install the bolts to the rear window panel bracket(s).

Tighten
Tighten the window panel bolts to 3 N·m (27 lb in).

4. Install the rear seat back. Refer to Rear Seat Back Replacement.