Door Lock Striker Adjustment Impala
Special Tools
J 39346-A Mini-Wedge Door Striker Aligner
Note: Properly align the door before adjusting the striker.
- Open the door.
- Loosen the door striker screws just enough to allow movement of the door striker.
- Install the
J 39346-A .
Note: Do not slam the door.
- Close the door while holding the outside handle in the open position.
- Open the door.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the door lock striker screws.
Tighten
Tighten the door striker screws to 25 N·m (18 lb ft).
- Remove the
J 39346-A .
- Close the door.