GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Impala 🢒 Transmission 🢒 Automatic Transmission - 4T65-E 🢒 Case Cover Bearing Assemble

Special Tools

    • J 8092 Universal Driver Handle
    • J 41991 Driveshaft Bearing Remover/Installer

For equivalent regional tools, refer to Special Tools.


    Object Number: 49306 Size: SH
  1. Assemble J 8092 driver handle and J 41991 bearing remover/installer for bearing installation.
  2. Place the case cover (400) on a clean, flat surface with the case mating surface up.

    3. Note: When installing the new bearing the part number should be visible (facing upward).

  3. Using the assembled tool, press the drive shaft bearing (431) into the case cover (400).