GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Impala 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rear Side Door Window Frame Front Applique and Front Channel Replacement

Removal Procedure

    Object Number: 794036 Size: SH

    Caution: To avoid paint damage, protect the area surrounding the part which you are removing or installing.

  1. Apply masking tape to the door frame and applique.
  2. Lower the window to the full down position.
  3. Remove the window channel retainer. Refer to Rear Side Door Window Channel Retainer Replacement.
  4. Remove the screws (1, 2) from the upper and lower corners of the inside door frame.
  5. Pull the window run channel weatherstrip out of the retainer and reposition it in order to access to the applique rivets.

    6. Object Number: 800468 Size: SH
  6. Drill out the 4 mm (5/32 in) rivets along the inside edge of the window channel retainer.
  7. Pull upward to release the applique from the door frame.

Installation Procedure

    Object Number: 800468 Size: SH
  1. Install the applique to the door frame.
  2. Install the new 4 mm (5/32 in) rivets along the inside edge of the window channel retainer to secure the applique to the door frame.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 794036 Size: SH
  3. Install the screws (1, 2) to the upper and lower corners of the inside door frame.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Install the window channel retainer. Refer to Rear Side Door Window Channel Retainer Replacement.
  5. Install the window weatherstrip.
  6. Remove masking tape.
  7. Inspect the window for proper operation.