GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Impala 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Front Bumper Fascia Emblem Replacement

Front Bumper Fascia Emblem Replacement Base


Object Number: 1608322 Size: SF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Plate Assembly, Front Bumper Fascia Name

Important: When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.

Tip
Use a J 25070 or equivalent to remove the old nameplate. Clean all adhesive from front bumper fascia, wipe surface dry with a clean lint-free towel prior to installing new nameplate.

Front Bumper Fascia Emblem Replacement Sport SS


Object Number: 1608316 Size: SF

Callout

Component Name

1

Front Bumper Fascia Name Plate Assembly

Tip

    • When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
    • Use a J 25070 Heat Gun or equivalent to remove the old nameplate. Clean all adhesive from front bumper fascia, wipe surface dry with a clean lint-free towel prior to installing new nameplate.

Special Tools

J 25070 Heat Gun - 500-750F