Callout
| Component Name
|
Fastener Tightening Specifications:
Refer to
Fastener Tightening Specifications
.
|
1
| Nameplate, Rear Compartment Lid (IMPALA)
Tip
- When removing protective liners from adhesive tape backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
- Use a
J 25070
or equivalent to remove the old nameplate. Clean all adhesive from the rear compartment lid, wipe surface dry with a clean lint-free towel prior to installing the new nameplate.
- Apply the new nameplate with the rear compartment lid in the closed position.
- Apply pressure to the nameplate to ensure full adhesion is made to the compartment lid.
|
2
| Nameplate, Rear Compartment Lid (Bowtie)
Tip
- When removing protective liners from adhesive tape backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
- Use a
J 25070
or equivalent to remove the old nameplate. Clean all adhesive from the rear compartment lid, wipe surface dry with a clean lint-free towel prior to installing the new nameplate.
- Apply the new nameplate with the rear compartment lid in the closed position.
- Apply pressure to the nameplate to ensure full adhesion is made to the compartment lid.
|
3
| Emblem, Rear Compartment Lid (SS)
Tip
- When removing protective liners from adhesive tape backed emblems, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
- Use a
J 25070
or equivalent to remove the old emblem. Clean all adhesive from the rear compartment lid, wipe surface dry with a clean lint-free towel prior to installing the new emblem.
- Apply the new emblem with the rear compartment lid in the closed position.
- Apply pressure to the emblem to ensure full adhesion is made to the compartment lid.
|
Callout
| Component Name
|
Fastener Tightening Specifications:
Refer to
Fastener Tightening Specifications
.
|
1
| Nameplate, Rear Compartment Lid (IMPALA)
Tip
- When removing protective liners from adhesive tape backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
- Use a
J 25070
or equivalent to remove the old nameplate. Clean all adhesive from the rear compartment lid, wipe surface dry with a clean lint-free towel prior to installing the new nameplate.
- Apply the new nameplate with the rear compartment lid in the closed position.
- Apply pressure to the nameplate to ensure full adhesion is made to the compartment lid.
|
2
| Emblem, Rear Compartment Lid (LS LT LTZ)
Tip
- When removing protective liners from adhesive tape backed emblems, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
- Use a
J 25070
or equivalent to remove the old emblem. Clean all adhesive from the rear compartment lid, wipe surface dry with a clean lint-free towel prior to installing the new emblem.
- Apply the new emblem with the rear compartment lid in the closed position.
- Apply pressure to the emblem to ensure full adhesion is made to the compartment lid.
|
3
| Nameplate, Rear Compartment Lid (Bowtie)
Tip
- When removing protective liners from adhesive tape backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
- Use a
J 25070
or equivalent to remove the old nameplate. Clean all adhesive from the rear compartment lid, wipe surface dry with a clean lint-free towel prior to installing the new nameplate.
- Apply the new nameplate with the rear compartment lid in the closed position.
- Apply pressure to the nameplate to ensure full adhesion is made to the compartment lid.
|