Heater and Air Conditioning Control Replacement. Chevrolet Impala 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Impala 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Heater and Air Conditioning Control Replacement

Callout	Component Name
Preliminary Procedure Remove the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement.
1	Heater and A/C Control Assembly Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. TIP Disconnect the HVAC control assembly electrical connector. Tighten 1.5 N·m (13 lb in)
2	Heater and Air Conditioning Control Assembly Refer to Control Module References for programming and setup information.

Callout

Component Name

Heater and A/C Control Assembly Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

TIP
Disconnect the HVAC control assembly electrical connector.

Tighten
1.5 N·m (13 lb in)

Heater and Air Conditioning Control Assembly

Refer to Control Module References for programming and setup information.