Preliminary Procedures

1. Position window approximately half way down in the door.
2. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement.
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement.
4. Tape the window to door frame to prevent it from moving.

1

Rear Side Door Window Regulator Bolts (Qty: 6)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Rear Side Door Window Regulator

Tip

1. Disconnect the electrical connector from the window regulator motor.
2. Transfer parts as necessary.