Front Side Door Water Deflector Replacement Impala
Removal Procedure
- Remove the front door trim panel. Refer to
Front Side Door Trim Panel Replacement .
- Remove the front door pull handle bracket from the front door inner panel.
- Disconnect all of the required electrical connectors.
- Remove the inside door handle gasket.
- Remove the front door water deflector from the front door inner panel.
Installation Procedure
- Align the front door water deflector to the front door inner panel. Secure the water deflector at the corners.
- Pull the front door wiring harness leads through the slits in the front door water deflector.
- Install the front door water deflector, start pressing the adhesive pattern at the bottom center and working outward and upward in order to prevent puckering.
- Install the inside door handle gasket.
- Connect all of the required electrical connectors.
- Install the front door pull handle bracket to the front door inner panel.
- Install the front door trim panel. Refer to
Front Side Door Trim Panel Replacement .