Note: This procedure is completed with the rear door closed at all times. Do each door hinge separately, and replace the broken door hinge first.

1. Open the front door in order to remove the rear door hinges.
2. Clean the mounting surfaces with clean a rag and mark the rear door hinge locations on each surface with a grease pencil or other suitable marker.
3. Remove the bolts from the doorside rear door hinge.
4. Remove the bolts (1-5) from the bodyside rear door hinge.
5. Remove the rear door hinge from the vehicle.

1. Position the rear door hinge to the alignment marks.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the bolts (1-5) to the bodyside rear door hinge.

Tighten
Tighten the bodyside rear door hinge bolts to 33 N·m (24 lb ft).

3. Install the bolts to the doorside rear door hinge.

Tighten
Tighten the doorside rear door hinge bolts to 33 N·m (24 lb ft).

4. Close the rear door.
5. Inspect the rear door for proper operation and alignment. Refer to Rear Door Adjustment.