Engine Splash Shield Replacement Right
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
- Remove the push-in retainers that hold the ABS lead to the engine splash shield.
- Remove the engine splash shield from the lower flange of the engine compartment side rail.
Installation Procedure
- Install the engine splash shield to the lower flange of the engine compartment side rail.
- Route the ABS lead through the slot in the engine splash shield.
- Align the holes in the engine splash shield to holes in the outboard side engine compartment side rail.
- Insall the push-in retainers to the engine splash shield.
Engine Splash Shield Replacement Left
Callout
| Component Name
|
Preliminary ProcedureRemove the left tire/wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
|
1
| Engine Splash Shield (Left) Plastic Retainer (Qty: 3)
|
2
| Engine Splash Shield (Left)
|