Rear License Plate Lamp Replacement. Chevrolet Impala 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Impala 🢒 Body Repair 🢒 Frame and Underbody 🢒 Rear License Plate Lamp Replacement

Rear License Plate Lamp Replacement Impala

Callout	Component Name
1	Rear License Plate Lamp Screws (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Rear License Lamp Tip Pull downward on the lamp in order to access the lamp electrical connector on the inside of the rear bumper fascia. Twist the connector socket counterclockwise in order to remove from the lamp housing. Pull the bulb outward to remove from the socket.
3	Rear License Plate Lens Tip Snap lens into outer rear compartment lid upon installation.

Callout

Component Name

Rear License Plate Lamp Screws (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

Rear License Lamp

Pull downward on the lamp in order to access the lamp electrical connector on the inside of the rear bumper fascia.
Twist the connector socket counterclockwise in order to remove from the lamp housing.
Pull the bulb outward to remove from the socket.

Rear License Plate Lens

Tip
Snap lens into outer rear compartment lid upon installation.