Warning: Refer to SIR Warning in the Preface section.

Warning: Refer to Battery Disconnect Warning in the Preface section.

Preliminary Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
2. Disable the SIR system. Refer to SIR Disabling and Enabling.
3. Remove the tilt lever. Refer to Tilt Lever Replacement.
4. Remove the steering wheel. Refer to Steering Wheel Replacement.
5. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement.

1

Ignition Lock Cylinder Retaining Pin Access Hole

Tip

1. Rotate the ignition lock cylinder to the crank position.
2. Use a suitable tool to depress the lock cylinder retaining pin through the access hole.
3. Release the lock cylinder the to run position.

2

Ignition Lock Cylinder

Tip
Pull the ignition lock cylinder from the steering column.