GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Impala 🢒 Steering 🢒 Steering Wheel and Column 🢒 Shift Lever Replacement

Removal Procedure

    Object Number: 419648 Size: SH
  1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement.
  2. Disconnect the shift lever electrical connector at the base of the steering column.
  3. Remove the shift lever screw (3) from the shift lever (4).
  4. Disengage the shift lever (4) from the linear shift assembly.
  5. Transfer the shift lever seal (2) if needed.

Installation Procedure
  1. Engage the shift lever (4) to the linear shift assembly.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 419648 Size: SH
  2. Install the shift lever screw (3) to the shift lever (4) and tighten it to 20 N·m (15 lb ft).
  3. Connect the shift lever electrical connector at the base of the steering column.
  4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement.