Warning: Do not strike or jolt the inflatable restraint sensing and diagnostic module (SDM). Before applying power to the SDM, make sure that it is securely fastened with the arrow facing toward the front of the vehicle. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.

Warning: Refer to SIR Warning in the Preface section.

Preliminary Procedure

1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
2. Remove the right front seat. Refer to Front Seat Replacement - Bucket.
3. Pull the carpeting back in order to access the sensing and diagnostic module (SDM). Refer to Floor Panel Carpet Replacement.
4. Program the inflatable restraint SDM after replacement. Refer to Control Module References.

1

Inflatable Restraint Sensing and Diagnostic Module Bolt/Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (88 lb in)

2

Inflatable Restraint Sensing and Diagnostic Module Assembly