Warning: Do not strike or jolt the inflatable restraint side impact sensor (SIS). Before applying power to the SIS make sure that it is securely fastened. Failure to observe the correct installation procedures could cause SIR deployment, personal injury, or unnecessary SIR system repairs.

Warning: Refer to SIR Warning in the Preface section.

Preliminary Procedure

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the front door panel. Refer to Front Side Door Trim Panel Replacement.

1

Inflatable Restraint Side Impact Sensor Assembly Bolt/Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Loosen the fasteners and slide the sensor out of the keyhole slots.

Tighten
10 N·m (89 lb in)

2

Inflatable Restraint Side Impact Sensor Assembly