Preliminary Procedures

1. Open the hood.
2. Release the inner headlamp retainer by pulling the retainer upward in order to release the headlamp.

1

Headlamp Assembly Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (53 lb in)

2

Headlamp Lock Pin

Tip
Pull headlamp from the outboard edge in order to release the lock pin from the fender flange retainer.

3

Forward Lamp Harness Connector

Tip
Disconnect the electrical connector before removing the headlamp from the vehicle.

4

Headlamp Assembly

Warning: Refer to Halogen Bulb Warning in the Preface section.