- Slide the sunroof sunshade to the open position.
- Move the sunroof glass panel to the fully closed position.
- Loosen the sunroof glass panel screws.
- Individually adjust the 4 corners (1) of the sunroof glass panel.
- Adjust the front of the sunroof glass panel to 1.5 mm (0.050 in) below the top surface of the roof panel (3).
- Adjust the rear of the sunroof glass panel to 1.5 mm (0.050 in) above the top surface of the roof panel (2).
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the sunroof glass panel screws.
Tighten
Tighten the screws to 4 N·m (35 lb in).