GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2009
🢒
Impala
🢒
Preface
🢒
Dangers, Warnings, and Cautions
🢒 Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement
Special Tools
J 42137
Steering Column Lock Plate Compressor Adapter
J 23653-SIR
Steering Column Lock Plate Compressor
For equivalent regional tools, refer to
Special Tools
.
Removal Procedure
Remove the inflatable restraint steering wheel module coil. Refer to
Inflatable Restraint Steering Wheel Module Coil Replacement
.
Remove the steering shaft lock plate retaining ring using the
J 23653-SIR
compressor and the
J 42137
adapter and dispose of it.
Remove the turn signal cancel cam plate (1).
Remove the turn signal cancel cam (2).
Remove the steering shaft upper bearing spring (3).
Remove the steering shaft upper bearing race seat (4).
Remove the steering shaft upper bearing (5).
Installation Procedure
Install the steering shaft upper bearing (4).
Install the steering shaft upper bearing race seat (3).
Install the steering shaft upper bearing spring (2).
Apply lubricant to the turn signal cancel cam (1). Refer to
Adhesives, Fluids, Lubricants, and Sealers
for the recommended lubricant.
Install the turn signal cancel cam (1).
Install the turn signal cancel cam plate (1).
Install the new steering shaft lock plate retaining ring using the
J 23653-SIR
compressor and the
J 42137
adapter .