GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Impala 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Turn Signal Switch Housing Replacement

Removal Procedure
  1. Remove the turn signal cancel cam and steering shaft upper bearing spring. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement.
  2. Remove the turn signal multifunction switch. Refer to Turn Signal Multifunction Switch Replacement.

    3. Object Number: 664269 Size: SH
  3. Slide the turn signal switch housing off of the steering column.

Installation Procedure

    Object Number: 664269 Size: SH

    Note: The turn signal switch housing must be pressed firmly against the steering column to seat it properly.

  1. Slide the turn signal switch housing onto the steering column.
  2. Install the turn signal multifunction switch. Refer to Turn Signal Multifunction Switch Replacement.
  3. Install the turn signal cancel cam and steering shaft upper bearing spring. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement.