GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Joy 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Washer Hose Replacement

Removal Procedure
  1. Open the hood.
  2. Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement .

    3. Object Number: 1618275 Size: SH
  3. Disconnect the washer hose connector.
  4. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

    5. Object Number: 1618267 Size: SH
  5. Remove the front wheel. Refer to Tire and Wheel Removal and Installation .
  6. Remove the screws and the front wheel well splash shield.

    7. Object Number: 1618270 Size: SH
  7. Disconnect the washer hose from the washer pump.

    8. Object Number: 1618281 Size: SH
  8. Remove the washer hose.

Installation Procedure

    Object Number: 1618281 Size: SH
  1. Install the washer hose.

    2. Object Number: 1618270 Size: SH
  2. Connect the washer hose to the washer pump.

    3. Object Number: 1618267 Size: SH
  3. Install the front wheelhouse splash shield with the screws and the clips.
  4. Install the front wheel. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.

    6. Object Number: 1618275 Size: SH
  6. Connect the washer hose connector.
  7. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .