For 1990-2009 cars only
Removal Procedure
- Remove the seats and carpet.
- Remove all trim panels.
- Peel off the damaged deadener with a steel spatula, carefully remove deadener.
Installation Procedure
- Before applying the deadener, thoroughly clean and dry the areas to be applied.
- Note the areas on the panels to apply the deadener.
- Heat the surface of deadener with a torch or heating gun until it adheres itself.
- Push and adhere to the panel with a rubber spatula.
- Install all trim panels.
- Install seats and carpet.
Important: Avoid the parts mounting holes and service holes.
Important: Be careful not to burn the composite parts when heating.
Important: In order to take full advantage of the deadener, its face must adhere and contact the panels perfectly.
