Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the washer reservoir inlet bolt.
- Remove the washer reservoir inlet.
Caution: Refer to Vehicle Lifting Caution in the Preface section.
- Raise and suitable support the vehicle. Refer to
Lifting and Jacking the Vehicle .
- Remove the front RH wheelhouse splash shield screws.
- Remove the front RH wheelhouse splash shield clips.
- Remove the front RH wheelhouse splash shield.
Installation Procedure
- Install the washer reservoir assembly with the bolts.
- Connect the washer pump electrical connector.
- Connect the washer hose connector.
- Install the front RH wheelhouse splash shield with the screws and the clips.
- Lower the vehicle.
- Install the washer reservoir with the bolt.
- Connect the negative battery cable.