Removal Procedure
- Remove the retainer clips
from the shifter boot.
- Disconnect electrical connector from under the access hole in
the floor matting.
- Remove the screw from the cover.
- Open the cover.
- Remove the bolts from the clamp.
- Remove the cover mounting screw and the cover from the clamp.
- Remove the tie strap.
- Pull the wiring through the shifter boot.
Installation Procedure
- Install the wiring through
the shifter boot.
- Install the tie strap.
- Install the cover mounting screw and the cover to the clamp.
- Install the bolts to the clamp.
- Close the cover.
- Install the screw to the cover.
- Connect electrical connector in the access hole in the floor matting.
- Install the retainer clips to the shifter boot.