Removal Procedure
- Open the hood.
- Remove the nuts from the handle.
- Remove the handle from the hood.
Installation Procedure
- Clean the surface where the handle is to be placed. Area must be dry and free of wax or grease.
- Remove the backing from the handle.
- Install the handle to the hood.
- Press down firmly on the handle to ensure a tight bond.
Notice: Refer to Fastener Notice in the Preface section.
- Install the nuts to the handle.
Tighten
Tighten the nuts to 7.5 N·m (66 lb in).
- Close the hood.