GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Block the wheels.
  2. Drain all of the air reservoirs. Refer to Air Brake Reservoir Draining .
  3. Remove the air lines from the double check valve. Refer to Hose and Line Replacement - Nylon Push-In Type Fitting .

  4. Object Number: 1488288  Size: SH
  5. Remove the double check valve from the dual application valve.
  6. Inspect the air lines for the following conditions:
  7. • Damage
    • Kinked
    • Worn
  8. Repair or replace any damaged, kinked, or worn air lines.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1488288  Size: SH
  1. Install the double check valve to the dual application valve.
  2. Tighten
    Tighten the double check valve to 25 N·m (19 lb ft).

  3. Install the air lines to the double check valve. Refer to Hose and Line Replacement - Nylon Push-In Type Fitting .
  4. Perform the air leakage test. Refer to Air Brake Double Check Valve Operational Check .
  5. Perform the operational test. Refer to Air Brake Double Check Valve Leakage Test .
  6. Remove the wheel blocks.