Removal Procedure
- Remove the I/P carrier. Refer to
Instrument Panel Carrier Replacement
in Instrument
Panel, Gages, and Console.
- Remove the vacuum harness (2) from the HVAC control assembly.
- Remove the vacuum harness (1,2) from the heater assembly.
- Disconnect the vacuum hose (1) from the vacuum pump assembly.
- Remove the vacuum harness grommet (2) from the cowl.
- Remove the vacuum harness.
Installation Procedure
- Install the vacuum hose harness.
- Install the vacuum harness grommet (2) to the cowl.
- Connect the vacuum hose (1) to the vacuum pump assembly.
- Install the vacuum hose harness (1) to the heater assembly.
- Install the I/P carrier. Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gages,
and Console.
- Install the vacuum harness (2) to the HVAC
control assembly.
- Connect the vacuum hose (1) to the vacuum pump assembly.