For 1990-2009 cars only
- Apply a 2-3 mm wide by 0.5-1.5 mm high bead of P/N 97720043 sealant to the lower oil pan mating surface.
- Install the lower oil pan.
- Install the lower oil pan bolts and nuts.
- Connect the oil level sensor.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the lower oil pan bolts and nuts in sequence to 10 N·m
(89 lb in).
