This feature controls the brightness of the instrument panel lights.

The thumbwheel for this feature is located to the right of the exterior lamp control.

Turn the thumbwheel up to brighten the lights. When the thumbwheel is moved to the first position, the radio display and transmission selection display will go to full intensity. The instrument panel cluster will also be dimly lit. Moving the thumbwheel up to the next position will activate the interior dome lamps.

The dome lamps will come on when you open a door.

You can also turn the dome lamps on by moving the thumbwheel, located to the right of the exterior lamp control, all the way up to the second position. In this position, the dome lamps will remain on whether a door is open or closed.

You can use the dome override button to set the dome lamps to automatically come on when a door is open, or to remain off.

The dome override button is located below the exterior lamp control.

If the dome override button is pushed in, the dome lamps will not come on. Use this feature when you want to leave your door(s) open for an extended period of time and do not want to run the battery down.

If the dome override button is in the out position, the interior lamps will work as usual.

The delayed illumination feature will allow you to enter or exit your vehicle with the lights on for about 20 seconds, after the door is closed or the ignition is cycled.

If your vehicle has reading lamps, press the button next to the lamp to turn the lamp on or off.