GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2008
🢒
Kodiak C-Series (Conventional) C4/C5
🢒
Power and Signal Distribution
🢒
Data Communications
🢒 Serial Data Gateway Module Replacement
Repair Procedure
Remove the engine cover. Refer to
Engine Cover Replacement
.
Reach under the instrument panel just to the left of the engine to locate the module.
Remove the connector from the module.
Release the clips that retain the module.
Remove the module from the vehicle.
Installation Procedure
Install the module to the vehicle.
Clip in the module retainers.
Install the connector to the module.
Install the engine cover. Refer to
Engine Cover Replacement
.
Refer to
Control Module References
for programming and setup information.