Electronic Throttle Actuator Control Module Replacement for Chevrolet Kodiak C-Series (Conventional) C4/C5 2009

Note: The ignition should always be OFF when removing or installing the throttle actuator control (TAC) module connectors.

1. Remove the electrical connectors from the TAC module.
2. Remove the TAC module from the multi-use module bracket shelf.

1. Install the TAC module to the multi-use module bracket shelf with 3 nuts.

Caution: Refer to Fastener Caution in the Preface section.

2. Connect the electrical connectors to the TAC module.

Tighten
Tighten the TAC module nuts to 9 N·m (80 lb in).

3. Refer to Control Module References for programming and setup information.