Auxiliary Generator Replacement for Chevrolet Kodiak C-Series (Conventional) C4/C5 2009

Warning: Refer to Fastener Caution in the Preface section.

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
2. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement for the 6.6L (LMM).
3. Remove the drive belt. Refer to Drive Belt Replacement.
4. Disconnect the engine wiring harness electrical connector (1) from the generator.
5. Reposition the engine wiring harness boot (8).
6. Remove the generator terminal nut (9).
7. Remove the engine wring harness terminal (10) from the generator.



8. Remove the auxiliary generator bolts (3).
9. Remove the auxiliary generator (2).

1. Install the auxiliary generator (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the auxiliary generator bolts (3).

Tighten
Tighten the bolts to 50 N·m (37 lb ft).




3. Install the engine wring harness terminal (10) to the generator.
4. Install the generator terminal nut (9).

Tighten
Tighten the nut to 25 N·m (18 lb ft).

5. Position the engine wiring harness boot (8).
6. Connect the engine wiring harness electrical connector (1) to the generator.
7. Install the drive belt. Refer to Drive Belt Replacement.
8. Install the air cleaner. Refer to Air Cleaner Assembly Replacement for the 6.6L (LMM).
9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.