Heater and Air Conditioning Control Replacement for Chevrolet Kodiak C-Series (Conventional) C4/C5 2009

1. Remove the I/P cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.
2. Remove the retaining screw (3) from the HVAC control assembly (4).
3. Pivot the HVAC control assembly to disengage the locking tab on the right side.
4. Disconnect the electrical connectors (1).
5. Disconnect the vacuum connector (2).
6. Remove the HVAC control assembly.

1. Connect the vacuum connector (2).
2. Connect the electrical connectors (1).



3. Install the HVAC control assembly.

Caution: Refer to Fastener Caution in the Preface section.

4. Install the retaining screw (3) to the HVAC control assembly (4).

Tighten
Tighten the screw to 2 N·m (18 lb in).

5. Install the I/P cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.