Tools Required

J 41240 Fan Clutch Remover and Installer

1. Place the water pump gaskets and the water pump into position.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the water pump bolts.

Tighten

•	Tighten the water pump bolts to 25 N·m (18 lb ft) for the first pass.

•	Tighten the water pump bolts to 50 N·m (37 lb ft) for the final pass.




3. Install the water pump pulley (2) and bolts (1).



4. Use the J 41240 in order to retain the water pump pulley.

Tighten
Tighten the water pump pulley bolts to 25 N·m (18 lb ft).