Cooling Fan Pulley Replacement 6.6L (LB7) Engine

1. Remove the air cleaner layer. Refer to the appropriate procedure:

•	Air Cleaner Replacement in Engine Controls - 6.6L (LB7)

•	Air Cleaner Replacement in Engine Controls - 7.2L

•	Air Cleaner Replacement in Engine Controls - 7.8L

•	Air Cleaner Replacement in Engine Controls - 8.1L

2. Remove the fan and clutch assembly. Refer to Fan Replacement .



3. Remove the bolts (3) from the cooling fan pulley (2).
4. Remove the cooling fan pulley.

1. Install the cooling fan pulley.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolts (3) to the cooling fan pulley (2).

Tighten
Tighten the bolts to 35 N·m (26 lb ft).

3. Install the fan and clutch assembly. Refer to Fan Replacement .
4. Install the air cleaner layer. Refer to the appropriate procedure:

•	Air Cleaner Replacement in Engine Controls - 6.6L (LB7)

•	Air Cleaner Replacement in Engine Controls - 7.2L

•	Air Cleaner Replacement in Engine Controls - 7.8L

•	Air Cleaner Replacement in Engine Controls - 8.1L