Removal Procedure
- Relieve the fuel system pressure. Refer to
Fuel Pressure Relief
.
- Clean any dirt from the fuel pressure regulator retainer and the surrounding area.
- Remove the fuel pressure regulator retainer (1).
- Remove the fuel pressure regulator from the fuel pressure regulator housing.
Installation Procedure
- Install the backup ring on the fuel pressure regulator.
- Install a new large O-ring on the fuel pressure regulator.
- Install the regulator filter on the fuel pressure regulator.
- Install a new small O-ring on the fuel pressure regulator.
- Lubricate the fuel pressure regulator large O-ring and the small O-ring with clean engine oil.
- Push the fuel pressure regulator into the regulator housing on the fuel rail.
- Install a new fuel pressure regulator retainer (1).
- Connect the fuel pressure regulator vacuum line (1).
- Connect the negative battery cable.
- Tighten the fuel filler cap.
- Inspect for leaks.
11.1. | Turn ON the ignition for 2 seconds. |
11.2. | Turn OFF the ignition for 10 seconds. |
11.3. | Turn ON the ignition. |
11.4. | Inspect for fuel leaks. |