Removal Procedure
- Disconnect the turbocharger vane control solenoid valve electrical connector.
- Remove the turbocharger oil feed pipe banjo bolt and washer.
- Reposition the oil feed pipe out of the way.
- Remove the vane control solenoid valve bracket bolt and bracket.
- Remove the turbocharger vane control solenoid valve from the turbocharger.
Installation Procedure
- Install the turbocharger vane control solenoid valve to the turbocharger.
Notice: Refer to Fastener Notice in the Preface section.
- Install the vane control solenoid valve bracket and bolt.
Tighten
Tighten the bolt to 23 N·m (17 lb ft).
- Position the oil feed pipe to the turbocharger.
- Install a NEW turbocharger oil feed pipe washer and the banjo bolt.
Tighten
Tighten the bolt to 34 N·m (25 lb ft).
- Connect the turbocharger vane control solenoid valve electrical connector.