Warning: file_put_contents(/var/www/html/cache/seo-b21e95cd40a743cd9df1ea01b2acacf6.cache): Failed to open stream: Permission denied in /var/www/html/src/PageSeo.php on line 534

Warning: Cannot modify header information - headers already sent by (output started at /var/www/html/src/PageSeo.php:534) in /var/www/html/public/index.php on line 31
Electronic Throttle Actuator Control Module Replacement. Chevrolet Kodiak C-Series (Conventional) C6/C7/C8 2005
GM Service Manual Online
For 1990-2009 cars only

Electronic Throttle Actuator Control Module Replacement for Chevrolet Kodiak C-Series (Conventional) C6/C7/C8 2005

Removal Procedure


    Object Number: 822271  Size: SH

    Important: The ignition should always be OFF when removing or installing the throttle actuator control (TAC) module connectors.

  1. Remove the electrical connectors from the TAC module .
  2. Remove the TAC module from the multi-use module bracket shelf.

Installation Procedure


    Object Number: 822271  Size: SH
  1. Install the TAC module to the multi-use module bracket shelf with 3 nuts.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Connect the electrical connectors to the TAC module .
  4. Tighten
    Tighten the TAC module nuts to 9 N·m (80 lb in).

  5. Refer to Control Module References for programming and setup information.