GM Service Manual Online
For 1990-2009 cars only

Front Wheel Bearing Lubricant Cap Replacement Bolt-On

Removal Procedure


    Object Number: 814770  Size: SH
  1. Place a suitable container under the hub cap in order to catch the oil.
  2. Remove the bolts and the washers.
  3. Remove the hub cap and the gasket . Do not allow gasket material to fall into the hub.

Installation Procedure


    Object Number: 814770  Size: SH
  1. Install a new gasket and the hub cap onto the hub . Align the gasket properly.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the bolts and washers .
  4. Tighten
    Tighten bolts evenly to 30 N·m (22 lb ft).

  5. Install new lubricant. Refer to Adding Lubricant to Hub Caps .

Front Wheel Bearing Lubricant Cap Replacement Press-On

Removal Procedure


    Object Number: 814772  Size: SH
  1. Remove the hubcap with a thin flat blade tool.
  2. Gently pry out the cap all the way around until cap comes off.

Installation Procedure


    Object Number: 814772  Size: SH
  1. Install the hub cap. Align the hub cap properly.
  2. Gently tap the cap around the edges until it is flush with the hub.