Warning: file_put_contents(/var/www/html/cache/seo-755f4bc86250e3e2a1c75bf27aa47609.cache): Failed to open stream: Permission denied in /var/www/html/src/PageSeo.php on line 534

Warning: Cannot modify header information - headers already sent by (output started at /var/www/html/src/PageSeo.php:534) in /var/www/html/public/index.php on line 31
Transmission Control Module Replacement. Chevrolet Kodiak C-Series (Conventional) C6/C7/C8 2005
GM Service Manual Online
For 1990-2009 cars only

Transmission Control Module Replacement for Chevrolet Kodiak C-Series (Conventional) C6/C7/C8 2005

Removal Procedure

  1. Open the hood.

  2. Object Number: 910599  Size: SH
  3. Disconnect the wiring harness connectors.

  4. Object Number: 910597  Size: SH
  5. Remove the accumulator bottle bracket retaining nuts and position the bottle out of the way.

  6. Object Number: 808144  Size: SH
  7. Remove the two multi-use bracket tray bolts and multi use bracket tray.

  8. Object Number: 808140  Size: SH
  9. Remove the three transmission control module retainer bolts or nuts and the transmission control module from the multi-use bracket tray.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 808140  Size: SH
  1. Install the transmission control module retainer to the multi-use bracket tray with three bolts or nuts.
  2. Tighten
    Tighten the nuts or bolts to 9 N·m (80 lb in).


    Object Number: 910597  Size: SH
  3. Install the accumulator bottle bracket nuts.
  4. Tighten
    Tighten the nuts to 9 N·m (80 lb in).


    Object Number: 808144  Size: SH
  5. If equipped, install the connector bracket with two nuts.
  6. Tighten
    Tighten the nuts or bolts to 9 N·m (80 lb in).


    Object Number: 910599  Size: SH
  7. Connect the electrical wiring harness to the transmission control module.
  8. Refer to Control Module References for programming and setup information.