For 1990-2009 cars only
Removal Procedure
- Remove the rear door trim panel. Refer to Front Side Door Trim Panel Replacement .
- Remove the run water deflector. Refer to Front Side Door Water Deflector Replacement .
- Remove the rear run channel from the door. Refer to Door Window Channel Replacement .
- Remove the screws from the door lock (1).
- Remove the lock rods from the lock.
- Remove the electrical connectors from the lock.
- Remove the lock rod guide from the door lock.
- Remove the bolts that retain the lock to the door.
- Remove the lock from the door.
Installation Procedure
- Install the lock to the door.
- Install the screws that retain the lock to the door.
- Install the lock rod guide to the door lock.
- Install the electrical connectors to the lock.
- Install the lock rods to the lock.
- Install the rear run channel to the door. Refer to Door Window Channel Replacement .
- Install the rear water deflector. Refer to Front Side Door Water Deflector Replacement .
- Install the rear door trim panel. Refer to Front Side Door Trim Panel Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten in sequence the retaining screws to 10 N·m (89 lb in).
