Removal Procedure
- Remove the instrument panel driver knee bolster panel. Refer to
Driver Knee Bolster Panel Replacement
in Instrument Panel,
Gages and Console.
- Remove the relay connector (2) from the instrument panel carrier (1).
- Remove
the hazard and turn signal flasher from the relay connector.
Installation Procedure
- Install
the hazard and turn signal flasher to the relay connector.
- Install the relay connector (2) to the instrument panel carrier (1).
- Install the instrument panel driver knee bolster panel. Refer to
Driver Knee Bolster Panel Replacement
in Instrument Panel,
Gages and Console.