Removal Procedure
- Raise and suitably support the vehicle, if required. Refer to
Lifting and Jacking the Vehicle
.
- If not equipped with the ML6 transmission, remove the transmission. Refer to
Transmission Replacement
for the Medium Duty transmission.
- If equipped with an RPO ML6, remove the front transmission mounts. Refer to
Transmission Mount Replacement
for the ZF S6-650 transmission.
- If equipped with the ML6 transmission, remove the transmission. Refer to
Transmission Replacement
for the ZF S6-650 transmission.
- If equipped with the ML6 transmission, remove the clutch housing bolts and brackets.
- If equipped with the ML6 transmission, remove the clutch housing adapter , if required.
Installation Procedure
- Install the clutch housing and brackets.
Notice: Refer to Fastener Notice in the Preface section.
- Install the flywheel housing adapter and bolts, if necessary.
Tighten
Tighten the flywheel housing adapter bolts to 60 N·m (44 lb ft).
- Install the clutch housing bolts.
Tighten
Tighten the clutch housing bolts to 50 N·m (37 lb ft).
- If equipped with RPO ML6, install the transmission mounts. Refer to
Transmission Mount Replacement
for the ZF S6-650 transmission.
- Install the transmission. Refer to
Transmission Replacement
for the ZF S6-650 transmission or to
Transmission Replacement
for the Medium Duty transmission.
- Lower the vehicle, if required.