GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Position the front wheels and the steering wheel straight ahead.
  2. Place a container under the power steering gear in order to catch fluid when removing the end limiters.

  3. Object Number: 905572  Size: SH
  4. Remove the following components from the steering gear:
  5. • The top end limiter (1)
    • The O-ring (2)
  6. Remove the following components from the steering gear:
  7. • The bottom end limiter (1)
    • The O-ring (2)

Installation Procedure


    Object Number: 905572  Size: SH
  1. Install the following components into the steering gear:
  2. Notice: Refer to Fastener Notice in the Preface section.

    • The O-ring (2)
    • The bottom end limiter (1)

    Tighten
    Tighten the end limiter to 12 N·m (106 lb in).

  3. Install the following components into the steering gear:
  4. • The O-ring (2)
    • The top end limiter (1)

    Tighten
    Tighten the end limiter to 12 N·m (106 lb in).

  5. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .