GM Service Manual Online
For 1990-2009 cars only

When a circuit goes out, the problem could be in either the primary or secondary underhood fuse blocks. These blocks use blade-type fuses.

Both underhood fuse blocks are located in the engine compartment, on the passenger's side of the vehicle.

To access the fuse blocks, gently squeeze both sides of the cover to unlatch the tabs at the top. Then, unsnap both attachments at the bottom and remove the cover.

Be sure to replace fuses with fuses of the same rating. Do not use fuses of higher amperage than those indicated on the fuse block.

Primary Underhood Fuse Block


Object Number: 1457113  Size: B4

Fuse

Usage

RR DEFOG

Rear Defog

ENG 1

Engine 1

ENG 3

Engine 3

PCM-B

Powertrain Control Module

BLANK

Empty

ENG 4

Engine 4

ENG 2

Engine 2

HTD FUEL

Heated Fuel

BLANK

Empty

BLANK

Empty

BLANK

Empty

A/C COMP

Air Conditioning Compressor

ABS 1

Anti-Lock Brake System 1

ABS 2

Anti-Lock Brake System 2

ABS 3

Anti-Lock Brake System 3

ENGINE

Engine

E/A PUMP

Electronic/Automatic Pump

HORN

Horn

NOTE 2

L18 Fuel, LG4 Powertrain Control Valve, LG5 Electronic Control Module

BLANK

Empty

STUD A

Spare

STUD B

Spare

Relay

Usage

NOTE 1

LG4 Powertrain Control Valve, L18 Fuel Pump, LG5 Heated Fuel

IGN B

Ignition

STARTER

Starter

HORN

Horn

IGN A

Ignition

PTO/ECU*

Power Take-Off/Engine Control Unit Diesel 7.8L DURAMAX™

REVERSE

Reverse

NEUTRAL START

Neutral Start

Secondary Underhood Fuse Block


Object Number: 829828  Size: A3

Fuse

Usage

IGN 1

Four-Wheel Drive Module

IGN 4

Ignition 4

IGN 3

Ignition 3

BATT/HAZ

Battery/Hazard Warning Flashers

HEADLAMP

Headlamps

LIGHTING

Interior/Exterior Lamps

HVAC

Comfort Control System

NOTE

C4/C5 Electric Brake, C6/C7/C8 Brake Lamps