Special Tools

J 41240 Fan Clutch Remover and Installer

1. Place the water pump gaskets and the water pump into position.

Caution: Refer to Fastener Caution in the Preface section.




2. Install the water pump bolts.

2.1.	Tighten the water pump bolts (1-4) a first pass in sequence to 25 N·m (18 lb ft) for the first pass.

2.2.	Tighten the water pump bolts (1-4) a final pass in sequence to 50 N·m (37 lb ft) for the final pass.




3. Install the water pump pulley (303) and bolts (302).



4. Use the J 41240 installer in order to retain the water pump pulley. Tighten the water pump pulley bolts to 25 N·m (18 lb ft).