GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Kodiak C-Series (Conventional) C6/C7/C8 🢒 Engine 🢒 Engine Mechanical - 8.1L 🢒 Engine Front Cover Removal

    Object Number: 470803 Size: SH

    Caution: This component is initially installed using a self-tapping bolt. Care should be taken when removing and/or installing the self-tapping bolt. Failure to use care when removing and/or installing the self-tapping bolt can lead to damage and unnecessary replacement of the self-tapping bolt and/or the component the self-tapping bolt is threaded into.

  1. Remove the camshaft position (CMP) sensor bolt.
  2. Remove the CMP sensor.
  3. Inspect the CMP sensor O-ring for cuts, cracks, tears, or damage.
  4. Replace the O-ring, as required.

    5. Object Number: 1309997 Size: SH
  5. Remove the engine front cover bolts (521).
  6. Remove the engine front cover (522).

    7. Note: The engine front cover gasket can be used again.

  7. Remove the engine front cover gasket (523).
  8. Remove the crankshaft front oil seal (125) from the engine front cover.