GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Kodiak C-Series (Conventional) C6/C7/C8 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Power Door Lock Actuator Replacement

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
  4. Remove the window regulator. Refer to Front Side Door Window Regulator Replacement .

    5. Object Number: 208733 Size: SH
  5. Remove the lock actuator mounting rivets by drilling.
  6. Remove the remote lock rod (2) from the actuator arm.
  7. Disconnect the wiring harness from the lock actuator.
  8. Remove the actuator from the module panel.

Installation Procedure

    Object Number: 208733 Size: SH
  1. Install the inner mounting panel to actuator rivets.
  2. Connect the wiring harness to the actuator.
  3. Install the remote lock rod (2) to the actuator arm.
  4. Install the window regulator to the door. Refer to Front Side Door Window Regulator Replacement .
  5. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.