GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Kodiak C-Series (Conventional) C6/C7/C8 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Tail Lamp Replacement

Removal Procedure

    Object Number: 200980 Size: SH
  1. Remove the bolt from the tail lamp.
  2. Remove the tail lamp.
  3. Remove the electrical connector from the tail lamp

Installation Procedure

    Object Number: 200980 Size: SH
  1. Install the tail lamp. Align the locator with the hole in the frame rail.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the bolt into the tail lamp. Make sure that the harness retaining clip is secured by the bolt.

    3. Tighten
    Tighten the tail lamp bolt to 35 N·m (26 lb ft).

  3. Connect the electrical connector to the tail lamp.